Invoice Number | INV-0027 |
Invoice Date | February 6, 2024 |
Total Due | $1,390.47 |
Semi-auto high responsive build of a MP5A3
Gearbox
• Fully diassemble & clean
• Modify gearbox to prevent cracking & for mosfet install
• Install upgraded bushings & re-shim original 13:1 gearset to new bushings, grease when complete
• Install Perun mosfet
• Modify original piston to prevent early tooth engagement, lubricate all o-rings & cylinder
• Only replaced air nozzle for o-ring CNC version, all other compression parts are good quality for this build
• Shorten trigger pull length
• Setup brushless motor, loctite pinion gear onto shaft
• Re-assemble gearbox & fit into receiver
• Setup mosfet to suit build
• Test fire - FPS to high, spring change makes FPS slightly to low, cut x3 coils from Sp130 spring and machine spring surface down to fit spring guide correctly
• Test fire - FPS now 380-385 or 1.35J-1.38J
Hop Up
• Disassemble hop up
• Install new barrel, bucking & nub combo
• Refit to gun, test fire & found low FPS
• Upon inspection noted barrel does not quite seat in hop chamber perfectly
• Switched back to original hop up with upgraded bucking & nub.
• Polished inside of original barrel
• Assemble & test fire - OK
• Range Test - OK, 50M+ from a 220mm barrel
Hrs/Qty | Service | Rate/Price | Sub Total |
---|---|---|---|
1 | Warhead Industries BASE Motor (Long Version) | $173.90 | $199.99 |
1 | F.L.T. Airsoft CNC Machined Bushings | $30.43 | $34.99 |
1 | CYMA MP5A3 - CM.041J (High Speed) | $565.21 | $649.99 |
5 | CYMA 130 Rds Polymer AEG Magazine for MP5 Series | $25.21 | $144.96 |
1 | Maple Leaf Omega Nub | $14.77 | $16.99 |
1 | Maple Leaf MR.HOP Hop-Up Bucking for R-HOP Airsoft AEG Barrels - 60D | $25.21 | $28.99 |
1 | Perun V2 Hybrid Mosfet - Rear Wired | $130.43 | $149.99 |
1 | Guarder SP130 | $27.82 | $31.99 |
1 | ZC Airsoft Shim Set | $6.95 | $7.99 |
1 | MAXX CNC Aluminum Double O-Ring Air Seal Nozzle - 21.25 | $17.38 | $19.99 |
2 | Gens Ace 1500mah 11.1v 25C LiPo Nunchuck Battery (T-Plug) | $52.17 | $119.98 |
Subtotal: | $1,405.85 |
---|---|
Discount: | -$210.88 |
Labor - 3H build time: | $172.50 |
Expenables: | $23.00 |
Total: | $1,390.47 (includes $181.36 GST) |
Use Invoice number as reference
RTA Group LTD
06-0197-0917380-00
ANZ Bank