Description
CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit is precisely made to improve accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series.
The Hopup Chamber ME unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber ME unit is designed to accept the nozzle length from 21.00mm to 21.25mm, and fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber ME Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to any V2 gear boxes with 11mm or 11.5mm inner bore.
More than that, the Hopup Chamber ME Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside hopup chamber by hand
| Includes | |
 |
1 x CNC Aluminum Hopup Chamber ME Pro (with BB Latching System) unit |
|
2 x Strong Clear Vinyl Cover |
|
1 x CNC Aluminum Standard-Hop Arm |
|
1 x CNC Aluminum R-Hop Arm |
|
1 x Silicone Rubber Standard-Hop Nub Damper |
|
1 x Silicone Rubber R-Hop Nub Damper |
|
1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub |
|
1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub |
|
1 x CNC Brass Threaded Slot Pin |
|
1 x CNC Delrin Locking C-Clip |
|
1 x CNC Barrel Brass Spacer |
|
1 x Brass Spacer Holder Oring |
|
3 x Steel Compression Spring |
| Specification |
|
Overall Length: 51mm |
|
Overall Height: 37.75mm |
|
Hub Outer Diameter (to fit into Gear Box): min 11mm – max 11.5mm |
|
Hub Outer Diameter (to fit into Outer Barrel): min 12mm |
|
Hub Inner Diameter (to fit Nozzle): max 8.3mm |
|
Feeder Outer Diameter (to fit magazine): min 9.25mm |
|
Feeder Length (to fit magazine): max 6.25mm |
|
Material: Aluminum 6061 |
| Features | |
|
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability |
|
Improved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series |
|
Precision rotary dial design for fine hopup adjustments |
|
Re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot |
|
Removable Brass Threaded Slot Pin for setup and maintenance |
|
Accepted the nozzle length from 21.00mm to 21.25mm |
|
Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs |
|
Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting |
|
Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight |
|
Compatible with any V2 gear boxes with 11mm or 11.5mm bore |
|
Specially designed with BB Latching System to prevent dropping BBs after removing the magazine |
|
Manually opened to release BBs from inside hopup chamber by hand |
|
The Dual UV LED Boards and Module set and Single UV LED Board w/ Clear Cover and Module set to glow BBs in the dark ready! |
|
The Empty Magazine Detection Sensor to stop Motor/HPA firing ready! |
John J. (verified owner) –
Expensive but you get what you pay for, I’m satisfied.
Chris (verified owner) –
Great airseal, and love the BB clip which stops the last BB dropping when switching mags
Christopher W. (verified owner) –
Great performance when set up right .
Matai Stewart (verified owner) –
Works flawlessly in my crb
Anonymous (verified owner) –
Amazing! Can’t go wrong with it and keeps your BBs shooting consistently straight. Numbers on the side really help me dial-in hop quickly especially after cleaning the inner barrel. Fits into my VFC 416 perfectly. Worth the money!
Chris J. (verified owner) –
This is my 2nd chamber for my 2nd gun.
Really good design and love the BB retention when switching mags, no more loose BBs raining out
Victor Marchionna (verified owner) –
I put a ZC 602 barrel on this with a flat prommy purple bucking and it works great, shooting .3s at about 7.5 on the dial. Very consistent, super super sensitive where the slightest movement changes the hop from perfect to wack, the dial doesn’t move on its own though and I haven’t had it go off during a game. I use the set up with a P* F2 and a Krytac PDW mk2 with no issues, alignment remained fine, feeding is fine when fcu is tuned correctly, clossed bolt works fine. Parts are stunning, very happy with it will be ordering another for my next rifle.
Anonymous (verified owner) –
works how it should
Adam (verified owner) –
Amazing hop up unit, really works well
Anonymous (verified owner) –
Excellent!
ivan roberts (verified owner) –
Exceptional service
Anonymous (verified owner) –
Quality at it’s best!
Jasper Mooney (verified owner) –
^
Eythan P. (verified owner) –
Good hop up unit but I wish RTA offered a cheaper alternative like a ZCI unit. I just cant see how this is worth the extra price.
Jake Grant (verified owner) –
Awesome product love it
Anonymous (verified owner) –
fantastic so far, adjustment is really easy
Ian .Clayton (verified owner) –
awesome product
Ben Stanley (verified owner) –
Lots of buts in the box, can’t wait to install it!
Robert Grey (verified owner) –
Very good product.
Paul K. (verified owner) –
Great quality product, Very happy, will definitely be shopping with Reapertech Airsoft again.