MAXX CNC Aluminum Hopup Chamber MI PRO | ICS Spec Hop Up

(10 customer reviews)

$114.99

Out of stock

Category: Tags: ,

Description

CNC Aluminum Hopup Chamber MI Pro (with BB Latching System) unit is precisely made to improve accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series.
The Hopup Chamber MI unit has a precision rotary dial design for fine hopup adjustments, also re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot.
The Hopup Chamber MI unit is designed to accept ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm, and also fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs.
The Hopup Chamber MI Housing is equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting, and 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight at all times when adapted to stock gear box or any V2 gear boxes with 11.5mm or 12mm inner bore.
More than that, the Hopup Chamber MI Pro unit is specially designed with BB Latching System to prevent dropping BBs after removing the magazine. The Latching System can be also manually opened to release BBs from inside hopup chamber by hand.

 

Includes
1 x CNC Aluminum Hopup Chamber MI Pro (with BB Latching System) unit
2 x Strong Clear Vinyl Cover set
1 x CNC Aluminum Standard-Hop Arm
1 x CNC Aluminum R-Hop Arm
1 x Silicone Rubber Standard-Hop Nub Damper
1 x Silicone Rubber R-Hop Nub Damper
1 x CNC Aluminum 4.5mm length Precision R-Hop Concave Nub
1 x CNC Aluminum 6mm length Precision R-Hop Concave Nub
1 x CNC Brass Threaded Slot Pin
1 x CNC Delrin Locking C-Clip
1 x CNC Barrel Brass Spacer
1 x Brass Spacer Holder Oring
3 x Steel Compression Spring

 

Specification
Overall Length: 51mm
Overall Height: 38.5mm
Hub Outer Diameter (to fit into Gear Box): min 11.5mm – max 12mm
Hub Outer Diameter (to fit into Outer Barrel): min 12mm
Hub Inner Diameter (to fit Nozzle): max 8.3mm
Feeder Outer Diameter (to fit magazine): min 9.25mm
Feeder Length (to fit magazine): max 6.25mm
Material: Aluminum 6061

 

Features
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability
Improved accuracy and ensure consistent air seal for ICS CXP/CS4/EBB (include old models) M4/M16 AEG series
Precision rotary dial design for fine hopup adjustments
Re-engineered the hopup levers and concave nubs to work best with R-hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot
Removable Brass Threaded Slot Pin for setup and maintenance
Compatible with ICS stock nozzle, or nozzle length from 21.00mm to 21.25mm
Fully compatible with stock bucking and most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs
Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting
Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight
Compatible with stock gear box or any V2 gear boxes with 11.5mm or 12mm bore
Specially designed with BB Latching System to prevent dropping BBs after removing the magazine
Manually opened to release BBs from inside hopup chamber by hand
The Dual UV LED Boards and Module set and Single UV LED Board w/ Clear Cover and Module set to glow BBs in the dark ready!
The Empty Magazine Detection Sensor to stop Motor/HPA firing ready!

 

10 reviews for MAXX CNC Aluminum Hopup Chamber MI PRO | ICS Spec Hop Up

4.9
Based on 10 reviews
5 star
90
90%
4 star
10
10%
3 star
0%
2 star
0%
1 star
0%
  1. Nic B. (verified owner)

    great piece of kit, very well manufactured.

  2. Anonymous (verified owner)

    Amazing hopup

  3. Sarah d. (verified owner)

    Son loves it.

  4. Matt K. (verified owner)

    Great part we’ll worth the money to upgrade

  5. Anonymous (verified owner)

    Very good

  6. Degan (verified owner)

    Exceptional performance

  7. Jamie Thompson (verified owner)

    Super easy to install and created a super tight airseal boosting the fps , giving 150mm tbb with a guardersp120 spring 370fps on 0.20 bb

  8. Hamish (verified owner)

    Great product

  9. Luke Rowe (verified owner)

    Great piece of kit for an ics m4 be putting these in all my guns

  10. George H. (verified owner)

    Very good quality

Only logged in customers who have purchased this product may leave a review.

Important Notice! Orders will not be processed between 22/03/24 - 08/04/24. You will still be able to make orders during this period but expect no updates until after 8th April 2024
X